Sharing a Line Wire
When there is more than one light switch in a switch box, you may find only one line wire connected to all of the switches. In this case, you'll see a single wire (usually black) that is connected to multiple wires, each going to one of the switches. Look for a wire connector that has bundled a wire from each of the switches to a single wire.
Connecting NOON switches to a shared line wire
A Line/Load wire from each NOON Base needs to be connected to the shared line wire. Once a shared Line wire is identified and labeled:
- Follow the installation guide or guided installation.
- When connecting the NOON Base wires, add one of the Line/Load wires from each NOON Base to the wire connector for the shared line wire. Use the original wire connector.
- Connect the other Line/Load wire from each NOON Base to its corresponding load wire.
- Complete the installation using the standard instructions.