Noon Support Articles

 

 

Article

NOON - Wi-Fi and Network Requirements

« Go Back

Article Information

 
TitleNOON - Wi-Fi and Network Requirements
Full Description

Wi-Fi and Network Requirments

A NOON Room Director is compatible with most residential Wi-Fi networks. If you are experiencing connectivity issues make sure that your Wi-Fi network meets these requirements. 

Wireless Frequencies

  • Requires 2.4 GHz Wi-Fi.
  • Note: You may have a 5 GHz Wi-Fi network. To enable a 2.4 GHz Wi-Fi network, refer to your router manual or contact your Internet Service Provider (ISP).

Range

  • Be sure to install a Room Director within range of your wireless router.

Security

  • Must use WPA or WPA2 security with a password.
  • To locate your security settings refer to your router manual or contact your Internet Service Provider (ISP). 

IPv4 network

  • Must have an IPv4 address assignment on your local area network.
  • To locate the IP address type being used by your network, refer to your router manual or contact your Internet Service Provider.

Firewall Settings

  • Your firewall settings may prevent NOON switches from connecting to the NOON service. You may need to adjust your firewall settings.
  • Adjusting your router’s firewall settings can affect your router's security. To locate your firewall settings refer to your router manual or contact your Internet Service Provider (ISP).

Ports

  • NOON switches use TCP port 443 to communicate with the NOON service.
  • For help with adjusting your Wi-Fi router settings, refer to your router manual or contact your Internet Service Provider.

Unsupported Networks

  • Captive portal
  • Enterprise 802.1x/RADIUS
  • Wi-Fi networks that are not password protected
  • WEP protocol

Note: The NOON Extension Switch connects to the Room Director via Bluetooth LE. If you are experiencing connectivity issues with your Extension Switch, contact Savant Support.

URL NameNOON-Wi-Fi-and-Network-Requirements