Support Articles

 

 

Article

Savant App shows "Host Not Found" During Setup

« Go Back

Article Information

 
TitleSavant App shows "Host Not Found" During Setup
Full Description
 
Host Not Found 
User-added image
The Savant App generates a Host Not Found error when the Savant Host is either not in discovery mode, or the mobile device in use is having trouble connecting with the Host via Bluetooth.  This can typically be solved using the steps below.
  • Ensure Savant Host is in Provisioning Mode (blinking yellow LED).
  • Ensure the correct Savant App is installed (See examples below)
  • Ensure Bluetooth is enabled on the phone/tablet the Savant App is being used on and that the device is within 30ft of the Savant Host.
  • Cycle Bluetooth on mobile device (turn off then back on again) and attempt to find Host again.
  • Factory reset Host: use a legal-sized paperclip to hold the reset button (in the pinhole on the back of the Host) until LED blinks red.  The Host LED should resume blinking yellow within 1 minute.  Attempt to find Host again
 
Savant App IconsSavant Pro Icons(Incompatible with the Savant Remote & Host kit)
User-added image
User-added image

If you are still having trouble connecting to the Savant Host, please contact Savant Support
URL NameSavant-App-shows-Host-Not-Found-During-Setup