Savant Devices

Troubleshooting devices and component.

Network Troubleshooting Guide

Initial Savant Host setup

Resetting Savant Devices

Savant Remote setup/configure overview

Downloadable PDF versions of Savant Documentation, including setup instructions and user guides.

This guide walks through the process of adding and properly configuring an AV Receiver to a configuration

Instructions for replacing a configured Savant Remote in your Savant Home.

This video shows off how to connect your Savant Host

LED status light descriptions.

During Initial Setup, The Savant App reports it is unable to find the host

What is the Savant Host used for?

How to change the volume controller or input switching component for a room in the Savant App

How to troubleshoot when the Savant App doesn't find your Savant devices.

Get an overview of how to control your Savant Home using voice commands.

How to set up your Savant Remote

Savant Remote and Host usage

This article lists all voice commands available for the Savant Remote

How to add Savant Devices to your Savant Home

Savant is discontinuing the Savant Remote and Host Kit (SAV-REM-KIT1), the Savant Remote (SAV-HST-0600), the Savant Remote (SAV-REM-0100), and the Savant Blaster (SAV-BLT-0200)

Savant App and device battery information.

The soft power button on the Savant Remote screen now has options for powering off services or rooms.

How to determine if you require a Savant Blaster and how to add a Savant Blaster

How to capture a scene with the Savant App

LED light locations

How to capture scenes using your Savant Remote

How to swap User Profiles on the Savant Remote

Savant Remote Base overview.

Steps to set up Savant Devices

How to access the settings screen on your Savant Remote.

Tips for troubleshooting Savant Blasters

Illustrated device communication paths.

This video shows off the features of the Savant Lamp Controller

Explanation of Over the Air (OTA) updates, their uses, and the requirements for them to occur.

How to activate a Scene manually using the Savant Remote.

Some troubleshooting steps for issues with limited control range.

How to reset, check LED state, edit name, and edit/view controlled devices for Savant Blasters.

Troubleshooting for lamps that are not controlled smoothly or behaving as expected.

How to resolve the IR Blaster showing as disconnected in the Savant App

How to send troubleshooting diagnostics from the Savant Remote

This video details the features of the Savant Remote

Savant Remote overview