When instructed by Savant Support, you can reset a Savant Host, a Savant Remote Base, or a Savant Lamp Control by inserting the straight end of a paper clip into a pinhole on the device. Be sure that the device remains plugged into its power outlet when being reset.
Refer to the diagrams below to identify the location of the reset pinholes on your Savant products.
The reset pinhole on the Savant Host.
The reset pinhole on the bottom of a Savant Remote Base.
The reset pinhole on the Lamp Controller.
The Savant Blaster has a reset button rather than a pinhole. The diagram below shows the location of this button on the bottom of the Blaster
The reset button on the bottom of a Savant Blaster.