RF Remote to RF Shade Motor Pairing Guide

Document Date: August 2026

For remote control functionality of RF shades, RF Remotes must be paired to the shade(s) they control:

1. With the shade motor powered on, Hold the PRG button on the remote located behind the battery cover.
2. After 5 seconds, all unpaired shade motors in range will start an up-and-down cycling of the shades at different speeds and increments.
3. When the desired motor starts moving upwards, immediately press UP on the remote. The shade will pause, and then continue upward.
4. As soon as the same motor starts moving downward, immediately press DOWN on the remote. The shade will pause and then jog back and forth. The remote is paired to the motor.
   HELPFUL: When pressing UP or DOWN on the remote, if the command is missed, try again when the shade changes direction.